 |
 |
|
|
The next generation of electronic sex toys vibrators and stimulators. |
|||
|
Technical System Information
The average home stereo is designed to accept very low level input signals from a large variety of sources (i.e.: CD, radio, tape player, equalizer, VCR, DVD, an a multitude of others), and amplify and process these signals through tone altering circuits, into the music we listen to. This amplifying action is completely controlled by the various controls on the stereo. The result is music or noise, depending on your definition of music, with all its tone and volume variations, played out through the speakers. A home stereo system provides ““amplitude modulated” waveforms than range from approximately 0 VAC thru 20 VAC at very low ampherage. These same signals normally drive your speakers and create movement in the speaker cones, that create the music we listen to. With the proper precautions and application these electronic or electrical signals can be used to produce nerve stimulation. No modifications or special wiring to your stereo are required.
You will need to purchase several common items found in any hardware store or home center to make connections, and for the various “probes” we show you how to make. (Approximately $10.00). It is very simple, once you know how. We show you a few clever tricks in application so that these same signals that are normally sent to the speakers as music (or noise), are instead routed through the sexual genitalia to produce the nerve triggering action already discussed. The results can be........unbelievable. Through the roof......as one might say.
The home stereo is classified by UL laboratories as a “Class II” output device. A “Class II” device we are all familiar with is your home doorbell, transformer and wiring. This means that the output voltage and power level available at the speaker terminals is below 50 VAC and requires neither shielded cable or any other protection to shield it from the consumer.
This is actually one of the most beneficial aspects of utilizing your home stereo system over expensive commercially available systems. This method is so versatile and can produce so many different types of sensations. Something is bound to be exactly what you need. Use the “Back” button on your browser to return to the site. Copyright 2004 - Technical Services Company
|
|||
The home stereo system is actually, to use electronic
terminology, "a high quality, low voltage signal amplifier". 
We recommend that the
stereo system you propose to use be of modern design with an output rating of at least 25 watts per channel. (Almost all are). In this context, ‘more is better’. A system with ratings of 50 to 100 watts per channel will be
considerably superior to a low power system. A “boom-box” with sufficient output can also be used as a portable device.
This pleasure can be continued for as long as you like, and
adjusted from very mild tingling through an entire range of settings up to intense throbbing pulses, or anywhere in-between. You are always in control of just what you wish to feel. Orgasm can also be extended by using the various
adjustments available on your equipment. The stereo is also capable of producing "true stereo" sensations beneath the surface of the skin, where the feeling moves
around in response to the type of signal input. (i.e. left to right channel). Other devices on the market, even though very expensive, cannot produce this type of feeling.
The types of sensations vary widely with the type of music or other input source. Rock and roll can pulse you to intense orgasm, whereas
something classical can produce a long slow arousing stimulation climaxing with a screaming crescendo orgasm. Other sounds feel like buzzing bees, or a strong needle spray shower. The variations are nearly infinite.